The Hardie Shake Coverage Calculator simplifies the planning process for your siding projects. By inputting your total area to be covered, the calculator will determine how many siding panels you will need. This tool is particularly useful as it helps to:
- Prevent Over-Buying: Accurately calculating the number of panels needed can significantly reduce the risk of purchasing excess material.
- Reduce Waste: Minimizing waste not only saves money but also aligns with sustainable building practices.
- Save Time: Spend less time calculating and more time executing your project with efficiency.
Formula of Hardie Shake Coverage Calculator
To determine the number of Hardie Shake panels you will need, use the following formula:
Number of Panels = Total Square Foot Coverage Needed ÷ Coverage Per Panel
where:
Coverage Per Panel for Hardie Shakes = 2 square feet.
This formula ensures that you purchase just the right amount of panels for your project, considering each panel covers two square feet.
Table for General Use
Below is a handy table that translates total square footage into the number of Hardie Shake panels required. This tool is ideal for quick references during project planning stages.
| Total Square Footage | Number of Panels Required |
|---|---|
| 100 sq ft | 50 panels |
| 200 sq ft | 100 panels |
| 300 sq ft | 150 panels |
| 400 sq ft | 200 panels |
| 500 sq ft | 250 panels |
Example of Hardie Shake Coverage Calculator
Let’s consider a practical example: If you need to cover a 150 square foot area with Hardie Shake panels, the calculation would be:
Number of Panels = 150 sq ft ÷ 2 sq ft/panel = 75 panels
This result indicates that you will need 75 panels to cover a 150 square foot area.
Most Common FAQs
Each Hardie Shake panel covers 2 square feet.
Divide the total area you need to cover by the coverage area of one panel. For instance, for an area of 250 square feet, you would need:
250 sq ft ÷ 2 sq ft/panel = 125 panels.
Yes, it’s advisable to add 10% extra to the calculated number of panels to accommodate any wastage or adjustments for irregular areas.