The Equivalent Dynamic Load Calculator is design to help engineers and designers estimate the effective load that a bearing experiences under combined radial and axial loads during operation. This value is essential in selecting the right bearing for the application, especially in rotating machinery where load combinations can impact service life and reliability. The calculator simplifies what would otherwise require manual formulas, making it easier to understand load impacts on rolling-element bearings.
Formula of Equivalent Dynamic Load Calculator
Où :
P = Equivalent dynamic bearing load (N)
Fᵣ = Radial load (N)
Fₐ = Axial (thrust) load (N)
X = Radial load factor (dimensionless)
Y = Axial load factor (dimensionless)
This formula merges both radial and axial forces into a single equivalent load value that can be use in life estimation formulas like the basic rating life (L₁₀).
Detailed Breakdown of Variables and Their Relevance
- Radial Load (Fᵣ): This is the force acting perpendicular to the shaft and is the primary load most bearings support in rotating systems.
- Axial Load (Fₐ): This force acts parallel to the shaft. It is also called thrust load and affects bearing selection in vertical or angled setups.
- Load Factors (X and Y): These are given by bearing manufacturers base on bearing type and load ratios. For deep groove ball bearings, X is often 1, and Y depends on the Fₐ/Fᵣ ratio.
- P (Equivalent Load): This is the standardized load value use to calculate bearing life and compare different bearing configurations.
This calculation ensures that the selected bearing can handle both force types during actual working conditions, preventing premature failure.
Table of General Terms and Reference Values
| Term or Query | Description |
|---|---|
| Radial load in bearing | The force applied perpendicular to the axis |
| Axial load meaning | The load acting along the axis of the shaft |
| X factor bearing | Load coefficient used for radial force influence |
| Y factor bearing | Load coefficient used for force axiale influencer |
| Equivalent load formula for ball bearing | Formula to combine radial and axial loads |
| Bearing load calculation example | Used to guide practical engineering calculations |
This table helps identify frequently used terms and concepts in mechanical design involving bearings.
Example of Equivalent Dynamic Load Calculator
Let’s consider a scenario where a bearing experiences a radial load of 3000 N and an axial load of 1000 N. The bearing's X and Y factors are given as 1 and 0.6 respectively.
Étape 1 : Appliquer la formule
P = X × Fᵣ + Y × Fₐ
P = 1 × 3000 + 0.6 × 1000
P = 3000 + 600 = N 3600
This means the bearing should be rated to handle a dynamic load of at least 3600 N under these conditions.
FAQ les plus courantes
It’s the combined effect of radial and axial forces on a bearing, represented as one simplified load value.
They are provided by bearing manufacturers and depend on bearing type and force ratios.
It ensures proper bearing selection for longer life and safer operation under real-world loads.