The dBm to Range Calculator helps in determining the communication range of a signal based on its power in decibels-milliwatts (dBm). It is particularly useful for engineers, technicians, and hobbyists working with radio frequency (RF) communications, Wi-Fi, and other wireless signals. By inputting parameters such as transmission power and receiver sensitivity, this calculator estimates the maximum distance a signal can travel before it becomes too weak to be detected.
Formula of Dbm To Range Calculator
To calculate the range (r) from dBm, use the following formula:
Convert dBm to Watts:
P (Watts) = 10^((P_dBm - 30) / 10)
Compute Range (r) in meters using the Free Space Path Loss (FSPL) formula:
r = (λ / (4 * π)) * 10^((P_dBm - P_min) / 20)
Où :
- r = range in meters
- λ = wavelength in meters (calculated as λ = c / f, where c = 3 × 10⁸ m/s is the vitesse of light and f is the frequency in Hz)
- P_dBm = transmitted power in dBm
- P_min = minimum receiver sensitivity in dBm
- π ≈ 3.1416
By applying these equations, the calculator quickly determines the maximum range a signal can travel under ideal free-space conditions.
Common dBm to Range Conversions
Below is a reference table showing approximate range calculations for different power levels in an open space environment. These are general estimates and can vary based on frequency, environmental factors, and obstacles.
| Puissance (dBm) | Puissance (watts) | Approximate Range (Meters) |
|---|---|---|
| 0 dBm | 1 mW | ~ 5 mètres |
| 10 dBm | 10 mW | ~ 15 mètres |
| 20 dBm | 100 mW | ~ 50 mètres |
| 30 dBm | 1 W | ~ 150 mètres |
| 40 dBm | 10 W | ~ 500 mètres |
| 50 dBm | 100 W | ~1.5 XNUMX XNUMX XNUMX km |
These values assume free-space conditions without obstacles or interference. Real-world results may differ.
Example of Dbm To Range Calculator
Let's calculate the range for a 20 dBm (100 mW) transmitter operating at a frequency of 2.4 GHz (typical for Wi-Fi).
- Calculer la longueur d'onde (λ)
= c / f
λ = (3 × 10⁸ m/s) / (2.4 × 10⁹ Hz)
λ ≈ 0.125 mètres - Calculate the range (r)
En supposant P_min (receiver sensitivity) is -90 dBm:r = (0.125 / (4 * 3.1416)) * 10^((20 - (-90)) / 20)
r = (0.125 / 12.5664) * 10^(110/20)
r ≈ 50 meters
This means the signal should be detectable up to approximately 50 mètres dans des conditions idéales.
FAQ les plus courantes
dBm (decibels-milliwatts) is a logarithmic unit that measures power levels in radio, microwave, and fiber-optic communications. It helps in determining signal strength and coverage.
Yes, increasing dBm generally extends the range, but real-world factors like interference, obstacles, and environmental conditions can limit the actual distance.
The calculator provides theoretical values under free-space conditions. Real-world applications may experience shorter ranges due to interference, obstacles, and atmospheric conditions.