Le dB ↔ Watts Calculator permet aux utilisateurs de convertir decibels (dB) to watts (W) and vice versa. Decibels are used to express power ratios logarithmically, les rendant utiles dans audio engineering, telecommunications, electronics, and radio frequency applications.
This calculator simplifies signal strength comparisons, power level assessments, and amplifier gain/loss evaluations, le rendant indispensable pour engineers, technicians, and researchers.
Formula for DB ↔ Watts Calculator
1. Convert dB to Watts
Since decibels measure power changes logarithmically, the absolute power in watts is calculated as:
Formula for dB to Watts (Absolute Power):
Watts = Reference Power × 10^(dB / 10)
Où :
- Reference Power (W) = Typically 1W, sauf indication contraire
- dB = Le décibel value to be converted
2. Convert Watts to dB
To express power levels in decibels:
Formula for Watts to dB:
dB = 10 × log10(Watts / Reference Power)
Où :
- Watts = The power level to be converted
- Reference Power (W) = Typically 1W, unless otherwise defined
Reference Table – Common dB to Watts Conversions
To make conversions easier, here is a pre-calculated reference table showing commonly used decibel values and their corresponding wattage:
| Décibels (dB) | Power (Watts) at 1W Reference | Power Multiplier |
|---|---|---|
| -30 DB | 0.001 W | 0.001x |
| -20 DB | 0.01 W | 0.01x |
| -10 DB | 0.1 W | 0.1x |
| 0 dB | 1 W | 1x |
| + 3 dB | 2 W | 2x |
| + 6 dB | 4 W | 4x |
| + 10 dB | 10 W | 10x |
| + 20 dB | 100 W | 100x |
| + 30 dB | 1,000 W | 1,000x |
Ce tableau aide audio engineers, radio frequency technicians, and power system designers estimate signal strength changes without complex calculations.
Example of DB ↔ Watts Calculator
1. Convert +10 dB to Watts
Using the dB to Watts formula:
Watts = 1W × 10^(10 / 10)
Watts = 1W × 10^1 = 10 W
A +10 dB increase corresponds to a 10x power increase, résultant en 10 watts.
2. Convert 50W to dB
Using the Watts to dB formula:
dB = 10 × log10(50 / 1)
dB = 10 × log10(50) ≈ 16.99 dB
Cela signifie que 50 watts correspond to approximately +17 dB relative to 1 watt.
FAQ les plus courantes
Decibels allow for easier comparison of very large or very small power values. Since power increases exponentielle, dB values provide a manageable scale for expressing gains and losses.
Negative dB values indicate a decrease in power relative to the reference level. For example, -3 DB means the power is half the reference level.
Yes! This calculator works for audio power, RF signal strength, amplifier gains, and general power level des mesures.