El Calculadora de eficiencia de una línea measures how effectively a production line is operating compared to its full potential. It belongs to the manufacturing efficiency calculator category. This tool helps production managers, industrial engineers, and supervisors monitor how well their workforce and equipment are being used in real time.
Production lines often face delays, idle time, and other inefficiencies. With this calculator, you can quantify how close a line is to operating at peak performance. By comparing actual output to the theoretical maximum, you get a percentage value that shows how efficiently the production resources are being utilized.
This is especially useful in garment factories, automotive assembly lines, electronics production, and any industry where repetitive tasks are performed across multiple stations or workers.
formula of Efficiency Of A Line Calculator
Line Efficiency (LE) = (Actual Output (AO) * Standard Time per Unit (ST)) / (Total Available Time (TAT) * Number of Workers (NW)) * 100
Lugar:
- LE = Line Efficiency (percentage)
- AO = Actual Output (number of units produced)
- ST = Standard Time per Unit (in hours or minutes)
- TAT = Total Available Time (total shift duration in hours or minutes)
- NW = Number of Workers or stations on the line
This formula shows how much of the available mano de obra and time is used to produce goods compared to the expected standard. A higher result means better efficiency, while a lower percentage points to wasted time or resources.
Tabla de referencia general
| Término | Descripción | Valor de ejemplo |
|---|---|---|
| Actual Output (AO) | Number of units the line produced | unidades 450 |
| Standard Time (ST) | Time needed to produce one unit based on standard performance | 5 minutes per unit |
| Total Available Time (TAT) | Total shift time available (minus breaks/downtime) | 8 horas = 480 minutos |
| Number of Workers (NW) | Total number of workers or stations on the line | 10 trabajadores |
| 100% de eficiencia | Ideal performance where no time is wasted | Perfect benchmark |
| Below 85% Efficiency | Typically considered poor in manufacturing settings | Necesita mejorar |
| Use in Garment Industry | Helps assess operator performance in apparel production lines | Ampliamente utilizado |
| Use in Lean Manufacturing | Clave metric for identifying production bottlenecks | Lean process metric |
This table makes it easy for users to understand the key variables involved without doing full calculations. It also shows real-world applications and performance benchmarks.
Example of Efficiency Of A Line Calculator
Escenario:
A textile factory wants to calculate the efficiency of its shirt production line. They have:
- AO = 600 shirts
- ST = 4 minutes per shirt
- TAT = 7.5 hours = 450 minutes
- NW = 12 workers
Paso 1: aplica la fórmula
LE = (600 * 4) / (450 * 12) * 100
LE = 2400 / 5400 * 100 ≈ 44.44%
Resultado:
The line is running at 44.44% de eficiencia. This result shows that there is considerable room for improvement, either by reducing idle time, increasing velocidad, or optimizing workflows.
Preguntas frecuentes más comunes
A good line efficiency is typically above 85%. Anything below 60% often indicates problems like machine downtime, slow production speed, or poor workflow design.
Yes. The calculator is suitable for any industry with a structured production process, such as apparel, electronics, food processing, and automotive manufacturing.
Multiplying by 100 converts the result into a percentage, which makes it easier to interpret and compare across different operations or shifts.