La dB ↔ Watts Calculator permite a los usuarios convertir decibels (dB) to watts (W) and vice versa. Decibels are used to express industria ratios logarithmically, haciéndolos útiles en audio engineering, telecommunications, electronics, and radio frequency applications.
This calculator simplifies signal strength comparisons, power level assessments, and amplifier gain/loss evaluations, por lo que es fundamental para engineers, technicians, and researchers.
Formula for DB ↔ Watts Calculator
1. Convert dB to Watts
Since decibels measure power changes logarithmically, the absolute power in watts is calculated as:
Formula for dB to Watts (Absolute Power):
Watts = Reference Power × 10^(dB / 10)
Lugar:
- Reference Power (W) = Typically 1W, a menos que se especifique lo contrario
- dB = El decibel value to be converted
2. Convert Watts to dB
To express power levels in decibels:
Formula for Watts to dB:
dB = 10 × log10(Watts / Reference Power)
Lugar:
- Watts = The power level to be converted
- Reference Power (W) = Typically 1W, unless otherwise defined
Reference Table – Common dB to Watts Conversions
To make conversions easier, here is a pre-calculated reference table showing commonly used decibel values and their corresponding wattage:
| Decibeles (dB) | Power (Watts) at 1W Reference | Power Multiplier |
|---|---|---|
| -30 DB | 0.001 W | 0.001x |
| -20 DB | 0.01 W | 0.01x |
| -10 DB | 0.1 W | 0.1x |
| 0 dB | 1 W | 1x |
| + 3 dB | 2 W | 2x |
| + 6 dB | 4 W | 4x |
| + 10 dB | 10 W | 10x |
| + 20 dB | 100 W | 100x |
| + 30 dB | 1,000 W | 1,000x |
Esta tabla ayuda audio engineers, radio frequency technicians, and power system designers estimate signal strength changes without complex calculations.
Example of DB ↔ Watts Calculator
1. Convert +10 dB to Watts
Using the dB to Watts formula:
Watts = 1W × 10^(10 / 10)
Watts = 1W × 10^1 = 10 W
A +10 dB increase corresponds to a 10x power increase, Dando como resultado vatios 10.
2. Convert 50W to dB
Using the Watts to dB formula:
dB = 10 × log10(50 / 1)
dB = 10 × log10(50) ≈ 16.99 dB
Esto significa que 50 watts correspond to approximately +17 dB relative to 1 watt.
Preguntas frecuentes más comunes
Decibels allow for easier comparison of very large or very small power values. Since power increases exponencialmente, dB values provide a manageable scale for expressing gains and losses.
Negative dB values indicate a decrease in power relative to the reference level. For example, -3 DB means the power is half the reference level.
Yes! This calculator works for audio power, RF signal strength, amplifier gains, and general power level medidas.