Das Verdrängungsvolumen-Rechner is a tool used to calculate the total volume displaced by all cylinders in an internal combustion engine. This value, commonly referred to as engine displacement, is a key factor in determining the engine’s power, efficiency, and classification. Whether you're designing an engine, tuning performance, or simply trying to understand specifications, this calculator simplifies the computation process by using essential physical parameters of the engine.
Displacement volume directly impacts an engine’s torque output, fuel consumption, and emissions. Engineers, mechanics, automotive enthusiasts, and students use this calculation to analyze engine capacity and compare different configurations, making it an important tool across industries.
Formula of Displacement Volume Calculator
To compute the displacement volume of an engine, the following formula is used:
Displacement Volume = π × (Bore Diameter / 2)² × Stroke Length × Number of Cylinders
Kennzahlen:
- Bohrungsdurchmesser is the diameter of each cylinder.
- Strichlänge is the distance the piston moves inside the cylinder.
- Anzahl der Zylinder is the total count of engine cylinders.
- π ist ungefähr 3.1416.
Berechnungsschritte:
- Messen Sie den Bohrungsdurchmesser (D): This is the full diameter of a single engine cylinder.
- Determine the Stroke Length (L): This is how far the piston travels vertically in the cylinder.
- Count the Number of Cylinders (N): Total cylinders in the engine configuration.
- Wenden Sie die Formel an: Use the formula to get the displacement volume in cubic units (typically cm³ or in³).
Make sure all measurements are in the same unit system to ensure accuracy (e.g., all in millimeters or inches).
General Terms Related to Displacement Volume
| Bedingungen | Beschreibung |
|---|---|
| Hubraum | The total volume displaced by all pistons in an engine. |
| Bohrung | Diameter of each cylinder in the engine. |
| Schlaganfall | Distance traveled by the piston inside the cylinder. |
| Zylinder | A chamber where the piston compresses air-fuel mixture and creates power. |
| cc (cubic centimeters) | Standard unit to measure engine displacement. |
| in³ (cubic inches) | Imperial unit for displacement volume, common in U.S. engines. |
| Volume per Cylinder | Volume displaced by a single cylinder during one stroke. |
| Brennkammer | Area in the cylinder where fuel ignition occurs. |
| Motorkapazität | Often used interchangeably with engine displacement. |
| Kolbenbewegung | Linear travel of a piston from top to bottom of the stroke. |
These terms are essential when dealing with engine calculations and technical discussions about performance specifications.
Example of Displacement Volume Calculator
Let’s use the displacement volume formula in a real scenario.
Ejemplo:
- Bore Diameter (D) = 86 mm
- Stroke Length (L) = 86 mm
- Number of Cylinders (N) = 4
Convert millimeters to centimeters:
Bore = 8.6 cm, Stroke = 8.6 cm
Wenden Sie nun die Formel an:
Displacement Volume = π × (Bore / 2)² × Stroke × Cylinders
= 3.1416 × (8.6 / 2)² × 8.6 × 4
= 3.1416×18.49×8.6×4 = 3.1416 × 636.26 = 1997.8 cm³
The total displacement volume is approximately 1998 cc (rounded), which is common for a 2.0L 4-cylinder engine.
Die häufigsten FAQs
Engine displacement affects power output, torque, fuel efficiency, and overall engine classification. Larger displacement typically means more power but higher fuel consumption.
Displacement is one factor influencing horsepower. Larger displacement allows for more air and fuel intake, which can produce more energy. However, horsepower also depends on engine design, compression ratio, and tuning.
Yes. Two engines can have identical displacement but produce different power due to differences in turbocharging, compression, fuel type, valve timing, and engine geometry.